3 Comments

  1. gracewthomas on November 30, 2021 at 11:18 pm

    If you shoot your gun , you clean your gun , then there is no problems



  2. ditchdigger93 on November 30, 2021 at 11:53 pm

    Take it out every time you clean the barrel. Not only do you need to also clean the breech plug it is so much easier to clean the barrel with it out. Clean the threads out good and put some anti seize on the threads and don’t over tighten it when you put it back into the gun and you’ll have a lot less trouble. Helpful to take a slightly over sized brush and actually screw it into the threads INSIDE the barrel too with some good black powder solvent on it and make sure it’s good and clean also. Something like carburetor cleaner is good to flush the threads out with to make sure it’s good and clean too. Make sure it’s good and dry and use that anti seize.



  3. Scuba Mike on December 1, 2021 at 12:06 am

    Everytime you pull the breach plug you have to put Anti-Seize on the threads