**Please Note: LSSFirearms.com is an affiliate of Grayboe.com. All products/links advertised are manufactured & sold by Grayboe. When clicking on a product, you will be directed to Grayboe.com, Grayboe's official website. Be sure to use LSS10 for 10% off stocks and bottom metals!
Horrible lighting in this video
This video made this task very easy. Perfectly done. User manual explains what all the shim numbers mean and was easy to figure out. Awesome.
Given that I am right handed and do not need to adjust the cast how to I just adjust the drop. New video perhaps
More helpfull 💐💐💐💐💐
When positioning the front shim should the markings be facing the rear, towards the shooter? I wished they zoomed in on that!
Does this procedure apply to A350 Xtreme?
It would be good to mention that you should lube the screw holes and screwdriver with something. Otherwise you will tear up the rubber around the screw holes. I’m sure most people will say it is common sense, it was not common sense for me. A $50 lesson learned.
This video is very helpful, but removing the Kick-off unit is not as easy as it appears. I couldn’t get a T15 screwdriver (recommended) that was small enough to get through the brass fitting. I called Beretta in NY and Scott suggested trying an allen wrench. A 3/32" one worked perfectly.
When he says ‘place the plastic shim with the letters facing you at the top’, does he mean facing you when shooting?
Is it the same for the a350 extrma????
My A400 Extreme Plus shoots low and to the right. Your video didn’t help. Any more suggestion on a video? Thanks.
i have one of those beretta a400 xplor actions and my recoil pad is fucked up and i need to order a new one, do you guys know the size of the padt o order like the original that came with the gun, im stuck here in iceland and no beretta supplier located anywhere near?? thank you mr. internet
Thank you.
Just bought a 1301 comp. I shoot left handed so tried to replace the DX plate with SX. Can’t figure out how to remove the end plate. I have the butt removed and the bolt and can see the Cast plate but can’t get the plastic end cap off. Can’t find instructions how to remove. Please do a video or provide explanation. PS – the Xtreme has screws whereas I don’t see any for the 1301.
Holy shit this dude breathes heavy
Man put on your safety glasses
I looked at mine and the plate and shim were in different settings! From the factory. Great.
Bonjour, merci pour votre video mais personne ne parle du demontage du kick off A400 excel sporting …..pourriez vous mettre une video …merci Luigi italdirect@wanadoo.fr
Hey
My wife wants to shoot that gun what is the minimal drop you can get from using shims ?
Thank you so much 🌷🌷🌷🌷
He says at 5:46 its held in with 5 t8 screws that’s wrong they are t10 screws.
Nice video but it did not deliver… I watched this to see how to adjust the length of pull… which the title offered… it was never addressed…. how do you adjust the length of pull on a stock with the kick off?
so, the shims are facing in opposite directions?
the metal one facing the back and the plastic one facing the barrel?
Also, is this identical to the 1301 comp pro?
Hey, i can’t seem to see the rib or the bead … how can I lift the stock ?
Thank you !!
What is the torque value in inch pounds on the 13mm nut?
I appreciate the video but you completely ignore the most challenging phase of cast/drop adjustment in this category of Beretta SA’s. On every unit from the 391 to the A400 replacing the washer and self locking nut is a hilariously haphazard and unmentioned exercise. Add in the Kick-Off assembly as an obstacle and the placing of the metal shim plus the self-locking nut is a ridiculous time wasting exercise. Beretta or Cole should market a deep well socket perhaps manufactured even from plastic of sufficient length, close tolerance and look-through design to allow first-attempt placement of the nut.
Can I eliminate the 1/2 inch spacer for the shortest LOP possible?
Can you leave a spacer off the back and just have the recoil pad there
how do you decrease LOP on a 20 ga Xplor with the kickoff system
How do I add Kick Off to my 1301 Tactical LE?
Nice instructions, clear and concise. The whole stock on my a400 extreme plus was randomly loose, I had to take the stock apart and tighten that 13mm bolt holding the stock on. One little correction though, once you take the butt pad off those 5 screws are t10 torx and not t8.
If anybody knows how to mountain red dot on A400 xplore ? Thanks
Is this the same on the a400 upland 20ga
Can you make a video on how to change a battery on a gunpod of an a400 xplor action?
Anyone know how much in-lb of torque you should apply to the kick off system when tightening the 13mm bolt
Hi, I’m a left handed shooter and I’m having a problem with my A400 Xtrema Unico. When I bring the gun up to shoulder I’m seeing way to MUCH of the rib, it’s very difficult to see st flat down the rib to the bead (so I’m always shooting high). I’ve heard several other shooters of this gun complain of the same problem even after shimming. Can anyone help out here please?…Thanks.
I did this yesterday just to service the kick off and clean out the stock. My question is my Phillips and T style screws are rusted pretty good. Should I contact Beretta for replacements or Brownells? Thanks
I kept waiting for one of the screw etc. to roll into one of the holes in the top of the bench. Thanks for the clip 🙂
First, thank you for the video, it helped. But just so I am clear, the cast polymer shim should be placed on the stock with the corresponding drop number visible and on the top? Just like the drop shim? In other words, both of the corresponding numbers/letters would be facing you as you look at both the front and the end of the stock. Is this correct? example: 60DX <— stock —>60DX Thanks in advance..
Does this same procedure work for the A300 outlander?
make some videos for the a350. i feel like my gun is a fake theres zero info
What size spacers come in the guns from the factory?
I changed the cast and drop on my extreme plus was getting cheek slap… fits and shoots great now. I was out the door on a hunt right after I did this and found a little rubber o ring about 1/4 inch outside dia. on the floor. I don’t know if it was out of my stock or off something else. Is there any o rings in stock of a kickoff?
Hello , how I can get it contact with some one from beretta that can explain me how to make some adjustments to the kick off sistem ?
Hi is it okay to use NO spacers and ONLY the butt pad? Thanks for your time.
I left my half inch spacer out all-together to reduce LOP on a new a400 Lite Syn Gun. Gonna try it like that tomorrow. It doesn’t appear to have to have the spacer at all. And the Gun fits my short arms now. Wish I could do that to my Unico KO….Thoughts?
Music at 4:00 is the ph intro
Mine is T10
Perhaps a $2000 shotgun could come with a toolkit?
Shim marking towards the front towards the shooter is a bit vague.
Might want to mention D for Dexter or right handed, S for sinister or left handed.
The downloadable owners manual has all drawings removed and is useless.
4:02 – 4:05 thank me later
the videos worked great for me… thanks. Beretta and snap-on are fine tools.