Build Your AR-15 Upper Receiver!
Build Your AR-15 Upper Receiver!
Everyone asks where I find AR-15 stuff in stock or where I order from, so here you are: http://bit.ly/2trc7Kg
———————————————————————————–
In this video I show you exactly how I install the ejection port cover and forward assist on a stripped upper receiver for an AR-15.
Thank you for watching and please subscribe for future videos!
thanks for the tutorial! helped alot!
Great video thanks!
Whelp c clip instantly launched itself out of my pliers and went to space
Thanks! This was very helpful and exactly what I was looking for.
Stoner said you don’t need that crap. Only the Army disagreed is what I was told.
When I do the forward assist, I put it in the vise up side down and drive the pin from the bottom. That way if you have a little scratch it doesn’t show. Good videos, and good instructions.
sorta confusing the way you tried explaining how to install the forward assist… you could just put it simple and instruct your viewers to have the hook part pointing towards the bcg and which will line the flat side of the forward assist facing in… the flat side is where the roll pin would hold ithe part in place….
What vise block is that? Mine is a clamshell-type and covers the ejection port…so I dont know how to secure the upper while installing the dust cover.
Is the roll pin the same size as the one for the bolt catch? I ordered a stripped Aero upper and the forward was missing the roll pin. I have a spare for the (bolt catch) but was unsure of the correct size for the forward assist. Will it fit, or should I go get a new pin? Great video walk through all the same. Thanks!
Excellent tutorial. Thank you.
I would like to thank you for your great videos. Very clear and concise….Great work!
I swear…. NSZ85 has some of the best videos online for showing others on how to build AR’s. You can understand every word clearly. A good quality focused camera. Great job!!
You did not put the fwd assist button?
That’s what she said, "pound it in till it’s flush" lol
Don’t worry… we can handle seeing the scratch you made.
Where can I get parts for a full upper ? Or piece together? On a budget
Your vids are always the first I reference!! Thanks
Nice video. Thanks!
finally. someone not bloviating about non sense and skipping the parts that matter. Now maybe can get through this build
Not a good vid discription
literally lost the c-clamp in the first second
Wow looks much less painful than I thought it would be.
1:17 your wifes only bedroom vocab
Your hands look so soft and delicate.
Nice, easy and straight to the point. Exactly how all videos should be. Great job. It would.definitely be appreciated, if other videos, would do the same, and edit out the crappy graphics, music, editorials, etc….Thanks for keeping some relatively simple, but helpful……..watchable!!!
C clip does not make any sense. It is supposed to hold the pin in place. Put it in between the dust port cover and the hole.
This channel is, without a doubt, the best AR15 build channel online, bar-none!
Great video! Thx!
5:30 a more available guide tool are plain Allen keys. Most people just have those on hand in multiple sizes, so it’ll work on multiple holes. Also use something brass if you’re tapping on it
Your videos are awesome helped me a lot thanks again
this is just basically reassembling the top of a super nintendo
Is this the first video on the upper?
Thank you, very helpful!
Thanks for the lesson. I’m a very beginner and just bought a 7.5" ar-15. I wanted to change the muzzle brake (looks like there’re many options that is better than birdcage it came with) but the part I need to unscrew is bit inside of the hand-guard (just inside to piss me-off, sorry). Is there a way to unscrew the birdcage w/o the taking whole damn hand-guard off? I appreciate your response in advance. Thanks!
ty
I appreciated this video – thank you!
Dumbest video on youtube
I’m building a AR 7.5 I got parts coming just received today the BCG and the upper but I’m learning a lot from your videos thanks 👍🏽
Where did you get the white receiver block used for torquing the barrel ?
Use some painters blue tape and when your punch misses the pin. U won’t have a mark on the upper. 😎
Made my lower watching your video! gracie,gracie………this will complete the upper as well, Thank you Amigo…….. KEEP ON ROCKIN IT!…………….. nsz85
You buggered up the hole at the top 5:51 and then tried to hide it with your thumb lol!
Own up to the scratches. Be a wise cautionary tale, no one is perfect.
Can the forward assist roll pin be put in from the bottom ?
Great video; nice and short and exactly what I needed to install my Aero Precision kit for these exact components.
I had to install the dust cover pin first before the C-Clip, though, since it was going onto a can launcher that has the launch tube blind-pinned onto the upper receiver (which also meant removing the C-Clip before installing the pin, since Aero Precision is kind enough to do that for the 99% of people that aren’t doing what I had to). Putting the dust cover pin in from behind is a bit rough, as the forward assist housing is slightly in the way… but, as Garand Thumb might say, I was able to get it in that tight fit by forcing it in from the rear… just like my Navy guys like it. LOL!
I like how you dont show how badly you marred your upper after you installed that forward assist roll pin. Im sure I will end up doing the same thing. lol!
Thank you!
What kind of vice block is that
Thanks for taking the time to share your knowledge. Remember…..the only one we have to please is God.
Jesus Loves You