**Please Note: LSSFirearms.com is an affiliate of Grayboe.com. All products/links advertised are manufactured & sold by Grayboe. When clicking on a product, you will be directed to Grayboe.com, Grayboe's official website. Be sure to use LSS10 for 10% off stocks and bottom metals!
That seems to be the for any handgun having trouble loading rounds. Great info. Thanks.
The consumers shouldn’t have to fix it, the people that manufacture the firearms and take your money should fix it when they’re manufacturing the guns don’t spend your money on Tauruses
Good info .
🔥
Thank you for making this video. I bought 2 of these guns both have the same issue.
But when the cavity of the hollow point catches on the bottom of the feed ramp (like mine) it doesn’t matter how much you polish it.
Se puede poner Un switch al g3c?
This man is right!!! I had the same problem and I polished it all up it works like a charm!!!
I have that problem too. It only works when I rack it with some strength.
I had problems with hollow points too. However, my problem was that they would not go all the way into the chamber. They stuck out about 1mm more than fmj. When I tried to load one it would lock up the entire pistol and ejecting it took a lot of effort. They got really stuck in the chamber. I ended up having to get an aftermarket barrel and that solved my issue.
thanks guys for you coments i will soon goint to make another video whit what machine i use and tips i will not show you the prosses because youtube wont let me do any tipe of prosses of any kind they think that is mods for guns .. so i see you guys on the next one thank and have a good day
Well done. Your English is just fine Angel.
Gracias mijo.
My g3c fed it,steel, aluminum, bass,hp,ALL, 1500 rounds, zero problems.
Polish it with what ???
Thank you for the video. I have several different handguns – Sig, Taurus, S&W, Ruger and CZ. I noticed on my CZP07 (which I bought used) the feed ramp is longer then the other 9MM and it came polished. No problems feeding ammo. Can someone share how to polish the feed-ramp what tool? ,
That Bushnell red dot failed twice on my gun.
had the same issue with the g3x but it solved itself after putting 50 rounds through it while the taurus g series is built exaclty like glock it has a bit longer on the "break in" period
Thank you cuz i just bought one & ive seen alot of videos about the issue, the G3 dosent have the issue but the G3c does for some reason but maybe it wont lets see when i pick it up
Ok cool think you I just got my gun thinks
Boricua. Great video. Keep it up..
My g3c doesn’t have any problems eating any jhp that I put through it, but my g3 is a different story. Saw a thread on Reddit that suggested polishing the feed ramp with a metal polishing compound and a dremel, so I tried it. 30 seconds later, the hollow points cycle through without any problem at all.
Thanks Angel,
I just did get a Taurus G2c and will follow your advise and polish a bit with a Dremel or so.
Your English is about better than mine being a "Kraut" (German), don’t worry about that
and enjoy safe shooting!
how did you mount the optic?
Thanks in advance!
thanks for the video…I’ve had mine for a year now and encountered the same problems…I’ll try it out and see how it fairs.
Boricua ,just got back from the range. Gun (G3C) was shooting fine. Then a round jammed in the chamber. That second strike BS did not work. The trigger was locked as if the safety was on. Checked the safety. It was off. tried to fire again and the trigger was locked. removed the magazine. Tried ejecting the round but the slide was locked. I kept the gun pointed down range . I then decided to remove the slide by pulling down on the two tabs to try and remove the slide.The damn thing went off. i cannot trust this gun. Even if it was a bad round, it should not have gone off. Btw, the gun was cleaned prior to shooting it. About 500 rounds through it. Going to reach out to Taurus. btw, fmj 124 grain used. no hollow point
Finally got mine running like a champ. I had "polished" the feed ramp before, but this time I got it to a chrome like reflective appearance.
Then hit that central support feed ramp. Man, that was the key. Thanks so much for the tip.
Thanks for the fix! I took my G3c out for the first one and had FTF issues with ball ammo. Definitely doing the polish work when I break it down for a thorough clean. Thanks again, Angel!
I found that just racking it real hard to get the first one in works just fine
I’m a new gun owner and I bought the G3c for my first gun. I bought hollow points and I have noticed a hang up on the first round when I load it. So what exactly did you polish it with?
Those soft brass casings love when you do this to them. Now look at the little ejector nicks on your bullet. In the future when you have a failure to eject with these bullets. Remember this moment 😂. You chamber a bullet too many times and you can actually cause the round to be over pressured. You can spot these rounds because they’ll be a little shorter than the others hahaha. You live and learn.
No need to apologize for your English my friend, it’s better than most native born Americans. Thanks for the tip!
Estoy por comprar una taurus g3c xl pero tengo mucha duda con relación al problema de alimentación por la rampa.. saludos desde Puerto Rico
That’s what I was going to do now I’m going to do that
Gracias pa! Buenísima solución… 👍
Don’t apologize for your English hermano! The video is excellent and very much appreciated!
The fixes seem to be 600 grit wool or paper to the feed ramp, carry with one in the chamber, or carry a FMJ with the first round.
Muchas gracias por este video, te lo agradezco muchisimo!🇵🇷✌🏽💜
The part on the barrel is called the feed ramp. It is a common fix to polish them with a dremel too and a felt pad and compound. Also this happens more with new guns, as a gun breaks in this problem subsides. This happens frequently with .22 pistols.
in competition we called that a reliability tune. this included a polished feed ramp, flared ejection port and a trigger job.
I don’t normally make a point to like a video, but when I do… It’s because my new friend has fixed my favorite gun.
Thanks
Great video of the gun, that I’ve lately been thinking of buying. Your English is EXCELLENT, you don’t need to apologize, especially since you’re from PR. Too many people don’t understand, or they don’t want to recognize that being born in Puerto Rico makes you an American citizen… as American as a fat old man who was born in Seattle. Let’s see more videos of yours.
Muchas Gracias por el video. Me ah estado pasando con la taurus G2C calibre 40S&W. Voy hacerle lo mismo a ver si con eso soluciono el problema, saludos
great video man, ur english isnt bad at all
Any one have there GC3 shoot low left?
Your English is great I can understand every word you’re saying
Does anyone else seem to have a problem with there GC3 shooting low and to the left I got mine the other day it might be me but it seems to shoot low left
Can i use some grease to lubricate it?